No “Stop_time” value defined in Results file of LR | stop_time=0 issue load runner analysis

When you open an analysis file, you may receive the error No Stop time value defined in LR Results file.
To acquire the results, simply follow the steps below.

• Right-click the lrr file and select Open with Notepad++ or Notepad.
• In the.lrr file, change the value of stop time.
• If stop time=0 appears in that list, modify it to stop time=1.
• If the analysis file lrr does not have a stop time line, add stop time=endtime.
• The time at the end should be in epoch format.
• To convert your local time to epoch time, use this converter.
• Save and close the file.

Here's an example of a lrr file:


Version=12.0.0.0 Product=HP LoadRunner Controller Path=E:xxx.lrs
Subject=Baseline
Result file=D:\easyloadrunner\Results\Perftest.lrr
ResultName=xxx ResultName=xxx ResultName=xxx ResultName=x
Time Zone=21600
Start time=1406841216
Daylight Bias=-60
Stop time=1406877216
Public local=1 (Configuration)
Is mix=1
Is runner file=0
[Running mode] Runner file=
By command, start reason=
By command, stop reason=