LoadRunner doesn’t provide native interface to WebLogic 9 and 10 (only to 8.1FP4) and SiteScope just do it using RMI-IIOP.
So before configuring such monitor, is good to get the Dev/Infra team aware of the monitoring request. They need to check and enable RMI IIOP features inside weblogic.
On the WebLogic Server:
Before edit any field on Weblogic you need click in “Lock & Edit”. When you finish all configuration settings, it is necessary click in “Active Changes” to put changes in place.
Enable RMI-IIOP protocol:
At Domain’s Security section, check if “Anonymous Admin Lookup” is enabled
For the service/server you’re monitoring, at service’s Settings, Protocols, IIOP, enable IIOP and in advanced configuration, set up IIOPUserName and IIOPPassword to weblogic’s admin credentials
Maybe a restart will be required
On the JMX Client
Make sure you will be running a JAVA VM at version 1.5 or above.
When activating the JMX client (jconsole, for example) add the following parameter:
-J-Dcom.sun.CORBA.transport.ORBTCPReadTimeouts=10:60000:500:10
This will change the timeouts for the CORBA protocol (remember we’re getting JMX from a WebLogic, so it goes thru RMI-IIOP)
Example:
H:\>jconsole -J-Dcom.sun.CORBA.transport.ORBTCPReadTimeouts=10:60000:500:10
Use the following URL pattern:
service:jmx:rmi:///jndi/iiop://YOURSERVERADDRESS:PORT/weblogic.management.mbeanservers.runtime
When asked for a Username and Password, give the RMI IIOPUsername/Password given in server configuration.
So before configuring such monitor, is good to get the Dev/Infra team aware of the monitoring request. They need to check and enable RMI IIOP features inside weblogic.
On the WebLogic Server:
Before edit any field on Weblogic you need click in “Lock & Edit”. When you finish all configuration settings, it is necessary click in “Active Changes” to put changes in place.
Enable RMI-IIOP protocol:
At Domain’s Security section, check if “Anonymous Admin Lookup” is enabled
For the service/server you’re monitoring, at service’s Settings, Protocols, IIOP, enable IIOP and in advanced configuration, set up IIOPUserName and IIOPPassword to weblogic’s admin credentials
Maybe a restart will be required
On the JMX Client
Make sure you will be running a JAVA VM at version 1.5 or above.
When activating the JMX client (jconsole, for example) add the following parameter:
-J-Dcom.sun.CORBA.transport.ORBTCPReadTimeouts=10:60000:500:10
This will change the timeouts for the CORBA protocol (remember we’re getting JMX from a WebLogic, so it goes thru RMI-IIOP)
Example:
H:\>jconsole -J-Dcom.sun.CORBA.transport.ORBTCPReadTimeouts=10:60000:500:10
Use the following URL pattern:
service:jmx:rmi:///jndi/iiop://YOURSERVERADDRESS:PORT/weblogic.management.mbeanservers.runtime
When asked for a Username and Password, give the RMI IIOPUsername/Password given in server configuration.
No comments:
Post a Comment